Temperature indicators

Surface thermometer: types and how to choose the right one

21 Oct 2026 3 min read· By the Surisa technical team

TL;DR: There are three main options for measuring the temperature of a surface: contact probes, infrared thermometers and adhesive labels. Probes and infrared give a one-off reading; adhesive labels stay stuck on and, if they are irreversible, record the maximum temperature reached even when nobody is watching. Surisa stocks labels from 29 to 290 °C.

Surface temperature is the temperature of the outer face of an object: a motor housing, a pipe, a mold, a radiator or a part just out of the oven. It can be very different from the internal temperature, and it is the one that matters in many quality, maintenance and safety checks.

Types of surface thermometer

Contact thermometer with a probe

A reader with a display to which a probe is connected and rested against the surface. It is accurate if contact is good, but the reading depends on how the probe is rested: on curved, rough or very hot surfaces it is easy to read low.

Infrared thermometer

It measures the thermal radiation of the surface from a distance, without touching it. It is fast and useful on dangerous or moving surfaces. Its limitation is emissivity: on shiny or polished metal surfaces it usually gives lower readings than the real temperature unless it is adjusted.

Sensors with recording (data loggers)

Sensors that are fixed to the surface and store readings at intervals, often with a connection to a phone over Bluetooth or wifi. They give a complete history, but they cost more and need batteries.

Adhesive temperature labels

Labels that are stuck directly onto the surface and change color with temperature. They need no batteries or instruments, and anyone can read them at a glance. There are two types:

  • Reversible (LCD): they show the current temperature.
  • Irreversible: each point changes color permanently once its temperature is exceeded, so they show the maximum temperature reached even if the surface has already cooled down.

When to use temperature labels

  • Unattended monitoring: knowing whether a motor, a bearing or an electrical panel overheated during a shift or a weekend.
  • Many points at once: comparing temperatures in different zones of a machine or an oven at low cost.
  • Hard-to-reach areas: where you cannot get in with a probe while the equipment is running.
  • Quality evidence: the label is peeled off and attached to the report.

Surisa's irreversible labels have an accuracy of ±1 °C up to 100 °C and ±1 % above that, and a polyester layer that protects them from water, steam and oil.

Which label to choose

  • Motors, bearings and electrical equipment (up to about 110 °C): 8-level label with a 37–65 °C or 71–110 °C range.
  • Molds, ovens and high-temperature processes: 10-level label with a 188–249 °C range.
  • A single alarm threshold: 1-level label, with references from 29 to 290 °C.
  • Continuous reading of the current temperature: 11-level reversible LCD thermometer with a 50–100 °C range.

For industrial process equipment, see also industrial oven temperature control.

Frequently asked questions about surface thermometers

Which is the best thermometer for measuring the temperature of a surface?

It depends on the use. For a quick one-off reading, an infrared or probe thermometer. To know the maximum temperature a surface reached over time, without being present, an irreversible label stuck onto it.

Why does an infrared thermometer read low on shiny metals?

Because polished metal surfaces emit little thermal radiation and reflect that of their surroundings. If the thermometer is not set to the emissivity of that surface, the reading comes out lower than the real temperature.

Do temperature labels measure the exact temperature?

They measure the temperature of the surface they are stuck to, in steps: each point indicates whether its temperature was exceeded. Surisa's irreversible labels have an accuracy of ±1 °C up to 100 °C and ±1 % above 100 °C.

How do I know whether a motor has overheated?

By sticking an irreversible temperature label onto the housing. If a point has changed color when you check it, the housing exceeded that temperature at some point, even if it is cold now.